3/8 UNC TRAILING ARM STUDS
A well known and long standing solution to Hub Studs pulling out of the alloy trailing arm
WITH A DIFFERENCE!
The only problem with the hub studs is the fine 5/16 unf thread stripping the thread in the alloy trailing arm.
The strength of the stud is very adequate.
So these studs from Classic Driving Development are 3/8 unc thread into the alloy and 5/16 unf into the hub carrier and the brake back plate.
Saves a lot of work!
Made from Hi Tensile Steel they come as a car set (12 off) with washers and nyloc nuts
GRIP or GRIPE ? YOUR CHOICE !
For further information and to discuss your requirement please email us on firstname.lastname@example.org or call 07812 766789. You can also enquire about an order below with your car details, we will contact you to confirm your requirement.
DRIVELINE, POWER STEERING AND SUSPENSION PRODUCTS AVAILABLE FOR:
Triumph TR 4A TR 5 TR 6 TR 7 TR 8 STAG Innsbruck Spitfire GT6 & Vitesse TVR M Series & TVR Vixen MGB MGC Morgan Austin Healey Jensen